MOLEKUR TM PLASTIC 0.76mm 125mm SQUARE

MOLEKUR TM PLASTIC 0.76mm 125mm SQUARE
MOLEKUR TM PLASTIC 0.76mm 125mm SQUARE - view 1MOLEKUR TM PLASTIC 0.76mm 125mm SQUARE - view 2MOLEKUR TM PLASTIC 0.76mm 125mm SQUARE - view 3MOLEKUR TM PLASTIC 0.76mm 125mm SQUARE - view 4
£144.00 (exc. VAT at 20%)
9002-317

Product Description

Single-layer Copolyester Aligner Material

Material / Structure: Single Layer PCTG Single-layer Copolyester Aligner Material
Thickness: 0.76mm
Recommended Use: Retainer / Aligner
Equivalent to: Upgrade of PETG, ESSIX , DURAN
Packing:10 blanks per Foil Bag 15 foil bags per box = 150 blanks Possible boxes of 50 blanks
Protective Film: Single sided
Size:125 square
Other Thickness Available:0.50 and 0.63 mm
Recommended Code: Scheu Ministar S: 611, Erkopress ci motion : 140-150 deg

Features
* Consistent Force
* Easy to Process
* High Moisture Resistance
* Cost Effective

Performances
* An upgrade of choice, hard or soft MOLEKUR TM One Series material offers two subtypes, the high-modulus One H and the low modulus One S, which have the features of hard and soft respectively to match clinical needs precisely.

* Excellent stain-resistant MOLEKUR TM One has outstanding properties of anti-yellowing and stain-resistant.
lt can resist environmental photo-degradation and dietary coloring.

* Excellent stress relaxation MOLEKUR TM One has great force retention behavior compared to other similar products on the market. Both One H and One S record more than 45% force compared to the inital state after 24 hours in water.


The main advantages of PCTG compared with PETG:

1. PCTG has significantly lower breakage rate than PETG, about 30%-50%.

2. PCTG has bit lower tensile modulus than PETG, where exhibiting lower/gentle initial force but better force retention performance than PETG.

3. The feature of point 2 also brings better wearing comfort for patients.

4. BPA FREE

To conclude, within the material range of Co-polyester, PCTG can be considered a overall upgrade of PETG, while still maintaining the cost-effective feature compared to multilayer material.

The UNIQ pd thermoforming material offers an innovative solution for aligner treatments by achieving maximum effect with just one layer. Unlike many multilayer foils, UNIQ pd permanently withstands forces generated during the entire treatment without any stability loss. UNIQ pd’s improved material characteristics allow it to exert less pressure over an extended period of time compared with conventional single-layer aligner materials. Thanks to its gentle initial forces and constant restoring forces, it also offers a considerably higher wearing comfort. As a result, the teeth move more smoothly and efficiently whilst the patient enjoys

Sold in a pack of 150 blanks.